Skip to content

2003 Ford F-150 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Ford F-150.

Bolt pattern
Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Ford F-150 X (PN-96)

1997 – 2004 USA market 3 trims

F-150 4.2

202 hp · V6 235/70 R16 104S 3 fitments
GenerationX (PN-96) 1997–2004
Power202 hp
EngineV6, Petrol
Center bore87.1 mm
PCD5x135
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 104S16x7 ET14 5x1352.4TiresRims
245/75 R1616x7 ET14 5x1354.1TiresRims
255/70 R16 109S16x7 ET14 5x1352.2TiresRims

F-150 4.6

231 hp · V8 235/70 R16 104S 5 fitments
GenerationX (PN-96) 1997–2004
Power231 hp
EngineV8, Petrol
Center bore87.1 mm
PCD5x135
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 104S16x7 ET14 5x1352.4TiresRims
245/75 R1616x7 ET14 5x1354.1TiresRims
255/70 R16 109S16x7 ET14 5x1352.2TiresRims
265/70 R1717x7.5 ET15 5x1353.4TiresRims
275/60 R17 110S17x7.5 ET15 5x13535TiresRims

F-150 5.4

260 hp · V8 275/45 R20 106S 6 fitments
GenerationX (PN-96) 1997–2004
Power260 hp
EngineV8, Petrol
Center bore87.1 mm
PCD5x135
ThreadM14 x 2.0
Tire sizeRim size and bolt patternPressure, psiPrices
275/45 R20 106S20x9 9J 5x13535TiresRims
235/70 R16 104S16x7 ET14 5x1352.4TiresRims
245/75 R1616x7 ET14 5x1354.1TiresRims
255/70 R16 109S16x7 ET14 5x1352.2TiresRims
265/70 R1717x7.5 ET15 5x1353.4TiresRims
275/60 R17 110S17x7.5 ET15 5x13535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.