1998 Ford F-250 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Ford F-250.

1998 Ford F-250 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 1999 2 trims

220 hp · 4.6 L V8 Petrol 4.6 L V8 245/75 R16 4 fitments

GenerationX 1997–1999

MarketUSA

Power220 hp

Engine4.6 L V8 Petrol 4.6 L V8, Petrol

Center bore87.1 mm

PCD7x150

ThreadM14 x 2.0

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/75 R16	16x7 ET44 ~~7x150~~	–	Tires Rims
OE	255/70 R16	16x7 ET44 ~~7x150~~	–	Tires Rims
Alt	245/70 R17	17x7.5 ET44 ~~7x150~~	–	Tires Rims
Alt	265/65 R17	17x7.5 ET44 ~~7x150~~	–	Tires Rims

235 hp · 5.4 L V8 Petrol 5.4 L V8 245/75 R16 4 fitments

GenerationX 1997–1999

MarketUSA

Power235 hp

Engine5.4 L V8 Petrol 5.4 L V8, Petrol

Center bore87.1 mm

PCD7x150

ThreadM14 x 2.0

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/75 R16	16x7 ET44 ~~7x150~~	–	Tires Rims
OE	255/70 R16	16x7 ET44 ~~7x150~~	–	Tires Rims
Alt	245/70 R17	17x7.5 ET44 ~~7x150~~	–	Tires Rims
Alt	265/65 R17	17x7.5 ET44 ~~7x150~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.