Skip to content

2018 Ford F-250 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Ford F-250.

Bolt pattern
Fitment tables

4 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear.

Ford F-250 IV (P558) Super Duty

2017 – 2020 USA market 4 trims

F-250 6.2i 4x2

385 hp · 6.2L V8 Flex-Fuel 245/75 R17 3 fitments
GenerationIV (P558) Super Duty 2017–2020
Power385 hp
Engine6.2L V8 Flex-Fuel
Center bore124.9 mm
PCD8x170
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1717x7.5 ET40 8x170–TiresRims
265/70 R1717x7.5 ET40 8x170–TiresRims
275/65 R1818x8 ET40 8x170–TiresRims

F-250 6.2i 4x4

385 hp · 6.2L V8 Flex-Fuel 245/75 R17 5 fitments
GenerationIV (P558) Super Duty 2017–2020
Power385 hp
Engine6.2L V8 Flex-Fuel
Center bore124.9 mm
PCD8x170
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1717x7.5 ET40 8x170–TiresRims
265/70 R1717x7.5 ET40 8x170–TiresRims
275/65 R1818x8 ET40 8x170–TiresRims
275/70 R1818x8 ET40 8x170–TiresRims
275/65 R2020x8 ET40 8x170–TiresRims

F-250 6.7D 4x2

450 hp · 6.7L V8 245/75 R17 3 fitments
GenerationIV (P558) Super Duty 2017–2020
Power450 hp
Engine6.7L V8, Diesel
Center bore124.9 mm
PCD8x170
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1717x7.5 ET40 8x170–TiresRims
265/70 R1717x7.5 ET40 8x170–TiresRims
275/65 R1818x8 ET40 8x170–TiresRims

F-250 6.7D 4x4

450 hp · 6.7L V8 245/75 R17 5 fitments
GenerationIV (P558) Super Duty 2017–2020
Power450 hp
Engine6.7L V8, Diesel
Center bore124.9 mm
PCD8x170
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1717x7.5 ET40 8x170–TiresRims
265/70 R1717x7.5 ET40 8x170–TiresRims
275/65 R1818x8 ET40 8x170–TiresRims
275/70 R1818x8 ET40 8x170–TiresRims
275/65 R2020x8 ET40 8x170–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.