Skip to content
tirewheelguide.com

2003 Ford F-450 Super Duty tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Ford F-450 Super Duty.

2003 Ford F-450 Super Duty tire sizes

225/70R19245/70R19
Bolt pattern
Other years
19992000200120022003200420052006 All 1999–2026
Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Ford F-450 Super Duty I (PHN131)

1999 – 2004 3 trims

F-450 Super Duty 6.0D

325 hp · 6.0 L V8 Diesel 6.0 L V8 225/70 R19 2 fitments
GenerationI (PHN131) 1999–2004
MarketUSA
Power325 hp
Engine6.0 L V8 Diesel 6.0 L V8, Diesel
Center bore170.1 mm
PCD8x225
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/70 R1919x6 8x225–TiresRims
OE245/70 R1919x6.75 8x225–TiresRims

F-450 Super Duty 6.8

310 hp · 6.8 L V10 Petrol 6.8 L V10 225/70 R19 2 fitments
GenerationI (PHN131) 1999–2004
MarketUSA
Power310 hp
Engine6.8 L V10 Petrol 6.8 L V10, Petrol
Center bore170.1 mm
PCD8x225
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/70 R1919x6 8x225–TiresRims
OE245/70 R1919x6.75 8x225–TiresRims

F-450 Super Duty 7.3D

250 hp · 7.3 L V8 Diesel 7.3 L V8 225/70 R19 2 fitments
GenerationI (PHN131) 1999–2004
MarketUSA
Power250 hp
Engine7.3 L V8 Diesel 7.3 L V8, Diesel
Center bore170.1 mm
PCD8x225
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/70 R1919x6 8x225–TiresRims
OE245/70 R1919x6.75 8x225–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading