1996 Ford Fairlane tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Ford Fairlane.

1996 Ford Fairlane tire sizes

205/65R15

Bolt pattern

5x114.3

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Other years

1968 1969 1970 1995 1996 1997 1998 1999 All 1962–2007

Fitment tables

4 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Fairlane IV (NL/DL)

1996 – 1998 Australia market 2 trims

Fairlane 4.0i

217 hp · I6 205/65 R15 1 fitment

GenerationIV (NL/DL) 1996–1998

Power217 hp

EngineI6, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15	~~5x114.3~~	–	Tires

Fairlane 4.9i

221 hp · V8 205/65 R15 1 fitment

GenerationIV (NL/DL) 1996–1998

Power221 hp

EngineV8, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15	~~5x114.3~~	–	Tires

Ford Fairlane IV (NF/DF)

1995 – 1996 Australia market 2 trims

Fairlane 4.0i

211 hp · I6 205/65 R15 1 fitment

GenerationIV (NF/DF) 1995–1996

Power211 hp

EngineI6, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15	~~5x114.3~~	–	Tires

Fairlane 4.9i

221 hp · V8 205/65 R15 1 fitment

GenerationIV (NF/DF) 1995–1996

Power221 hp

EngineV8, Petrol

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15	~~5x114.3~~	–	Tires

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.