1966 Ford Falcon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1966 Ford Falcon.

1966 Ford Falcon tire sizes

175/70R13 195/70R14 205/60R15

Bolt patterns

5x114.3

4x114.3

2 generations were sold in 1966. Check your chassis code before ordering wheels.

Other years

1962 1963 1964 1965 1966 1967 1968 1969 All 1960–2017

Fitment tables

4 trims sold in 1966

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Falcon XR

1966 – 1968 Australia market 1 trim

Falcon All trims

N/A · N/A 195/70 R14 2 fitments

GenerationXR 1966–1968

PowerN/A

EngineN/A

Center boreN/A

PCD5x114.3

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14	14x6 ET0 ~~5x114.3~~	–	Tires Rims
205/60 R15	15x7 ET0 ~~5x114.3~~	–	Tires Rims

Ford Falcon XP

1965 – 1966 Australia market 3 trims

Falcon 2.4

96 hp · I6 155x R13 2 fitments

GenerationXP 1965–1966

Power96 hp

EngineI6, Petrol

Center bore62 mm

PCD4x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4 ET30 ~~4x114.3~~	25	Tires Rims
175/70 R13	13x4.5 ET30 ~~4x114.3~~	28	Tires Rims

Falcon 2.8

111 hp · I6 155x R13 2 fitments

GenerationXP 1965–1966

Power111 hp

EngineI6, Petrol

Center bore62 mm

PCD4x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4 ET30 ~~4x114.3~~	25	Tires Rims
175/70 R13	13x4.5 ET30 ~~4x114.3~~	28	Tires Rims

Falcon 3.3

121 hp · I6 155x R13 2 fitments

GenerationXP 1965–1966

Power121 hp

EngineI6, Petrol

Center bore62 mm

PCD4x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4 ET30 ~~4x114.3~~	25	Tires Rims
175/70 R13	13x4.5 ET30 ~~4x114.3~~	28	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.