Skip to content

1979 Ford Falcon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1979 Ford Falcon.

1979 Ford Falcon tire sizes

Bolt pattern

2 generations were sold in 1979. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 1979

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Falcon XD

1979 – 1982 Australia market 4 trims

Falcon 3.3

N/A · I6 195/60 R14 2 fitments
GenerationXD 1979–1982
PowerN/A
EngineI6, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 4.1

N/A · I6 195/60 R14 2 fitments
GenerationXD 1979–1982
PowerN/A
EngineI6, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 4.9

N/A · V8 195/60 R14 2 fitments
GenerationXD 1979–1982
PowerN/A
EngineV8, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 5.8

N/A · V8 195/60 R14 2 fitments
GenerationXD 1979–1982
PowerN/A
EngineV8, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Ford Falcon XC

1976 – 1979 Australia market 1 trim

Falcon All trims

N/A · N/A 195/70 R13 2 fitments
GenerationXC 1976–1979
PowerN/A
EngineN/A
Center boreN/A
PCD5x114.3
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R1313x6 ET0 5x114.3TiresRims
205/60 R1414x7 ET0 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.