Skip to content

1984 Ford Falcon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Ford Falcon.

1984 Ford Falcon tire sizes

Bolt pattern

2 generations were sold in 1984. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Falcon XF

1984 – 1988 Australia market 1 trim

Falcon All trims

N/A · N/A 195/60 R14 2 fitments
GenerationXF 1984–1988
PowerN/A
EngineN/A
Center boreN/A
PCD5x114.3
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Ford Falcon XE

1982 – 1984 Australia market 4 trims

Falcon 3.3

N/A · I6 195/60 R14 2 fitments
GenerationXE 1982–1984
PowerN/A
EngineI6, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 4.1

N/A · I6 195/60 R14 2 fitments
GenerationXE 1982–1984
PowerN/A
EngineI6, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 4.9

N/A · V8 195/60 R14 2 fitments
GenerationXE 1982–1984
PowerN/A
EngineV8, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims

Falcon 5.8

N/A · V8 195/60 R14 2 fitments
GenerationXE 1982–1984
PowerN/A
EngineV8, Petrol
Center boreN/A
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x6 ET20 5x114.3TiresRims
205/50 R1515x7 ET10 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.