Skip to content

2009 Ford Flex tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Ford Flex.

Bolt pattern
Fitment tables

1 trim sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Ford Flex Flex

2008 – 2012 1 trim

Flex 3.5i

262 hp · 3.5L V6 235/60 R18 102T 6 fitments
GenerationFlex 2008–2012
Power262 hp
Engine3.5L V6, Petrol
Center bore63.4 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R18 102T18x7.5 ET39 5x114.335TiresRims
235/55 R19 101H19x8 ET39 5x114.335TiresRims
235/60 R17 100T17x7.5 ET39 5x114.335TiresRims
255/45 ZR20 101W20x8 ET39 5x114.335TiresRims
255/45 ZR20 101W20x8 ET35 5x114.335TiresRims
265/35 R2222x9 ET39 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.