Skip to content

2005 Ford GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Ford GT.

2005 Ford GT tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Ford GT I

2005 – 2006 USA market 1 trim

GT 5.4

550 hp · 5.4L V8 235/45 ZR18 88Y / 315/40 ZR19 103Y 1 fitment
GenerationI 2005–2006
Power550 hp
Engine5.4L V8, Petrol
Center bore70.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 ZR18 88Y18x9 ET50 5x114.333TiresRims
Rear315/40 ZR19 103Y19x11.5 ET40 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.