Skip to content

2001 Ford Laser tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Ford Laser.

2001 Ford Laser tire sizes

Bolt patterns
4x100
II (KQ), I (KN)
5x114.3
II (KQ)

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Laser II (KQ)

2001 – 2002 3 trims

Laser 1.6i

101 hp · I4 175/65 R14 1 fitment
GenerationII (KQ) 2001–2002
Power101 hp
EngineI4, Petrol
Center boreN/A
PCD4x100
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET45 4x100–TiresRims

Laser 1.8i

123 hp · I4 185/65 R14 2 fitments
GenerationII (KQ) 2001–2002
Power123 hp
EngineI4, Petrol
Center boreN/A
PCD4x100
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R1414x5.5 ET45 4x100–TiresRims
195/55 R15 4x100–Tires

Laser 2.0i

131 hp · I4 195/50 R16 1 fitment
GenerationII (KQ) 2001–2002
Power131 hp
EngineI4, Petrol
Center boreN/A
PCD5x114.3
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
195/50 R1616x6 ET50 5x114.3–TiresRims

Ford Laser I (KN)

1999 – 2001 2 trims

Laser 1.6i

106 hp · I4 175/65 R14 1 fitment
GenerationI (KN) 1999–2001
Power106 hp
EngineI4, Petrol
Center boreN/A
PCD4x100
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET45 4x100–TiresRims

Laser 1.8i

121 hp · I4 185/65 R14 1 fitment
GenerationI (KN) 1999–2001
Power121 hp
EngineI4, Petrol
Center boreN/A
PCD4x100
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R1414x5.5 ET45 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.