1998 Ford Maverick tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Ford Maverick.

1998 Ford Maverick tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 1998 Europe market 2 trims

117 hp · I4 215/80 R15 102S 4 fitments

GenerationI Facelift 1996–1998

Power117 hp

EngineI4, Petrol

Center bore100 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/80 R15 102S	15x6 ET25 ~~6x139.7~~	30	Tires Rims
225/75 R15 102T	15x7 ET25 ~~6x139.7~~	30	Tires Rims
235/75 R15 105T	15x7 ET25 ~~6x139.7~~	2	Tires Rims
235/70 R16 104T	16x7 ET25 ~~6x139.7~~	2.4	Tires Rims

123 hp · 2.7L I4 215/80 R15 102S 4 fitments

GenerationI Facelift 1996–1998

Power123 hp

Engine2.7L I4, Diesel

Center bore100 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/80 R15 102S	15x6 ET25 ~~6x139.7~~	30	Tires Rims
225/75 R15 102T	15x7 ET25 ~~6x139.7~~	30	Tires Rims
235/75 R15 105T	15x7 ET25 ~~6x139.7~~	2	Tires Rims
235/70 R16 104T	16x7 ET25 ~~6x139.7~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.