Skip to content

2027 Ford Mondeo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2027 Ford Mondeo.

2027 Ford Mondeo tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2027

Open a trim for its factory package and every alternative size, front and rear.

Ford Mondeo V Facelift

2026 – 2027 2 trims

Mondeo 1.5T EcoBoost (Liftback, 5d)

205 hp · 1.5 L I4 Hybrid 1.5 L I4 235/50 R18 3 fitments
GenerationV Facelift 2026–2027
MarketChina
Power205 hp
Engine1.5 L I4 Hybrid 1.5 L I4, Hybrid
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/50 R1818x7.5 5x108TiresRims
Alt235/55 R1717x7 5x108TiresRims
Alt235/45 R1919x7.5 5x108TiresRims

Mondeo 2.0T EcoBoost (Liftback, 5d)

257 hp · 2.0 L CAF484WQC1 I4 Petrol 2.0 L CAF484WQC1 I4 235/50 R18 3 fitments
GenerationV Facelift 2026–2027
MarketChina
Power257 hp
Engine2.0 L CAF484WQC1 I4 Petrol 2.0 L CAF484WQC1 I4, Petrol
Center bore63.4 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/50 R1818x7.5 5x108TiresRims
OE235/45 R1919x7.5 5x108TiresRims
Alt235/55 R1717x7 5x108TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.