1976 Ford Mustang Mach 1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1976 Ford Mustang Mach 1.

1976 Ford Mustang Mach 1 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1974 – 1978 2 trims

105 hp · 2.8L V6 205/60 SR14 2 fitments

GenerationII 1974–1978

Power105 hp

Engine2.8L V6, Petrol

Center bore63.4 mm

PCD4x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 SR14	14x5.5 ET20 ~~4x108~~	–	Tires Rims
205/55 HR15	15x6 ET10 ~~4x108~~	–	Tires Rims

139 hp · 4.9L Windsor V8 205/60 SR14 2 fitments

GenerationII 1974–1978

Power139 hp

Engine4.9L Windsor V8, Petrol

Center bore63.4 mm

PCD4x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 SR14	14x5.5 ET20 ~~4x108~~	–	Tires Rims
205/55 HR15	15x6 ET10 ~~4x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.