Skip to content
tirewheelguide.com

2026 Ford Mustang Mach-E tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Ford Mustang Mach-E.

2026 Ford Mustang Mach-E tire sizes

225/55R19245/45R20225/60R18245/50R19
Bolt pattern
Other years
2020202120222023202420252026 All 2020–2026
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Ford Mustang Mach-E Mustang Mach-E

2020 – 2027 2 trims

Mustang Mach-E Extended Range

365 hp · Electric 225/55 R19 7 fitments
GenerationMustang Mach-E 2020–2027
MarketUSA
Power365 hp
EngineElectric, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1919x7 ET47 5x10835 F / 41 RTiresRims
OE225/55 ZR1919x7 ET47 5x10835 F / 41 RTiresRims
Alt225/55 ZR1919x7.5 ET46 5x10835 F / 41 RTiresRims
Alt245/50 ZR1919x8 ET46 5x10835 F / 41 RTiresRims
Alt245/45 ZR2020x8 ET47 5x10835 F / 36 RTiresRims
Alt245/45 R2020x8 ET47 5x10835 F / 36 RTiresRims
Alt245/45 ZR2020x8.5 ET46 5x10835 F / 36 RTiresRims

Mustang Mach-E Standard Range

264 hp · Electric 225/55 ZR19 7 fitments
GenerationMustang Mach-E 2020–2027
MarketUSA
Power264 hp
EngineElectric, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 ZR1919x7 ET47 5x10835 F / 41 RTiresRims
OE225/55 R1919x7 ET47 5x10835 F / 41 RTiresRims
Alt225/60 R1818x7 ET47 5x10835 F / 41 RTiresRims
Alt225/60 R1818x7 ET47 5x10835 F / 41 RTiresRims
Alt225/55 R1919x7.5 ET46 5x10835 F / 41 RTiresRims
Alt245/45 ZR2020x8 ET47 5x10835 F / 36 RTiresRims
Alt245/45 R2020x8 ET47 5x10835 F / 36 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading