Skip to content

1993 Ford Mustang tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Ford Mustang.

Fitment tables

3 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear.

Ford Mustang III Facelift

1983 – 1986 3 trims

Mustang 2.3i

105 hp · 2.3L I4 195/75 SR14 6 fitments
GenerationIII Facelift 1983–1986
Power105 hp
Engine2.3L I4, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5 ET28.4 4x108–TiresRims
195/75 SR1414x5.5 ET28.4 4x108–TiresRims
195/70 SR1414x5.5 ET28.4 4x108–TiresRims
205/70 HR1414x5.5 ET28.4 4x108–TiresRims
205/65 HR1515x6 ET25 4x108–TiresRims
225/60 VR1515x7 ET22.4 4x108–TiresRims

Mustang 5.0i

205 hp · 4.9L V8 225/55 ZR16 6 fitments
GenerationIII Facelift 1983–1986
Power205 hp
Engine4.9L V8, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR1616x7 ET22.4 4x108–TiresRims
245/50 ZR1616x7.5 ET20 4x108–TiresRims
245/50 ZR1616x8 ET20 4x108–TiresRims
225/50 ZR1717x7 ET20 4x108–TiresRims
225/50 ZR1717x7.5 ET20 4x108–TiresRims
245/45 ZR1717x8 ET20 4x108–TiresRims

Mustang 5.0i

235 hp · 4.9L V8 225/55 ZR16 6 fitments
GenerationIII Facelift 1983–1986
Power235 hp
Engine4.9L V8, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/55 ZR1616x7 ET22.4 4x108–TiresRims
245/50 ZR1616x7.5 ET20 4x108–TiresRims
245/50 ZR1616x8 ET20 4x108–TiresRims
225/50 ZR1717x7 ET20 4x108–TiresRims
225/50 ZR1717x7.5 ET20 4x108–TiresRims
245/45 ZR1717x8 ET20 4x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.