1998 Ford Mustang tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Ford Mustang.

1998 Ford Mustang tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1998 2 trims

150 hp · 3.8L V6 205/65 HR15 4 fitments

GenerationIV 1994–1998

Power150 hp

Engine3.8L V6, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 HR15	15x6.5 ET24 ~~5x114.3~~	–	Tires Rims
225/60 VR15	15x7 ET24 ~~5x114.3~~	–	Tires Rims
225/55 ZR16	16x7.5 ET30 ~~5x114.3~~	–	Tires Rims
245/45 ZR17	17x8 ET30 ~~5x114.3~~	–	Tires Rims

225 hp · 4.6L V8 225/55 ZR16 4 fitments

GenerationIV 1994–1998

Power225 hp

Engine4.6L V8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 ZR16	16x7.5 ET30 ~~5x114.3~~	–	Tires Rims
245/50 ZR16	16x7.5 ET30 ~~5x114.3~~	–	Tires Rims
245/45 ZR17	17x8 ET30 ~~5x114.3~~	–	Tires Rims
245/40 ZR18	18x8 ET30 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.