Skip to content

2015 Ford Mustang tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Ford Mustang.

2015 Ford Mustang tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Ford Mustang VI (S550)

2015 – 2017 3 trims

Mustang 2.3 EcoBoost

310 hp · 2.3L I4 235/55 R17 99H 5 fitments
GenerationVI (S550) 2015–2017
Power310 hp
Engine2.3L I4, Petrol
Center bore70.5 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 99H17x7.5 ET37.5 5x114.332TiresRims
235/50 ZR18 97W18x8 ET40 5x114.332TiresRims
255/40 ZR19 96W19x8.5 ET42.5 5x114.332TiresRims
255/40 ZR19 96Y19x9 ET45 5x114.332TiresRims
265/35 ZR20 99Y20x9 ET42.5 5x114.32.5TiresRims

Mustang 3.7Ti

300 hp · 3.7L V6 235/55 R17 99H 5 fitments
GenerationVI (S550) 2015–2017
Power300 hp
Engine3.7L V6, Petrol
Center bore70.5 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 99H17x7.5 ET37.5 5x114.332TiresRims
235/50 ZR18 97W18x8 ET40 5x114.332TiresRims
255/40 ZR19 96W19x8.5 ET42.5 5x114.332TiresRims
255/40 ZR19 96Y19x9 ET45 5x114.332TiresRims
265/35 ZR20 99Y20x9 ET42.5 5x114.32.5TiresRims

Mustang 5.0Ti

435 hp · 5.0L V8 235/50 ZR18 97W 5 fitments
GenerationVI (S550) 2015–2017
Power435 hp
Engine5.0L V8, Petrol
Center bore70.5 mm
PCD5x114.3
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/50 ZR18 97W18x8 ET40 5x114.32.2TiresRims
255/40 ZR19 96W19x8.5 ET42.5 5x114.32.4TiresRims
255/40 ZR19 96W19x9.5 ET52.5 5x114.32.4TiresRims
265/35 ZR20 99Y20x9 ET42.5 5x114.32.5TiresRims
265/35 ZR20 99Y20x10 ET50 5x114.32.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.