1986 Ford P100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Ford P100.

1986 Ford P100 tire sizes

205/70R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1981 – 1988 2 trims

72 hp · 1.6 L I4 Petrol 1.6 L I4 205/70 R15 1 fitment

GenerationI 1981–1988

MarketEurope

Power72 hp

Engine1.6 L I4 Petrol 1.6 L I4, Petrol

PCD5x127

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15	15x5.5 ET50 ~~5x127~~	–	Tires Rims

90 hp · 2.0 L I4 Petrol 2.0 L I4 205/70 R15 1 fitment

GenerationI 1981–1988

MarketEurope

Power90 hp

Engine2.0 L I4 Petrol 2.0 L I4, Petrol

PCD5x127

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15	15x5.5 ET50 ~~5x127~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.