1995 Ford P100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Ford P100.

1995 Ford P100 tire sizes

205/70R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1988 – 1995 2 trims

74 hp · 1.8 L I4 Diesel 1.8 L I4 205/70 R15 1 fitment

GenerationII 1988–1995

MarketEurope

Power74 hp

Engine1.8 L I4 Diesel 1.8 L I4, Diesel

Center bore65.1 mm

PCD5x160

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15	15x6 ET50 ~~5x160~~	–	Tires Rims

76 hp · 2.0 L I4 Petrol 2.0 L I4 205/70 R15 1 fitment

GenerationII 1988–1995

MarketEurope

Power76 hp

Engine2.0 L I4 Petrol 2.0 L I4, Petrol

Center bore65.1 mm

PCD5x160

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15	15x6 ET50 ~~5x160~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.