1992 Ford Probe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Ford Probe.

1992 Ford Probe tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1992 2 trims

110 hp · I4 185/70 R14 90S 3 fitments

GenerationI 1989–1992

Power110 hp

EngineI4, Petrol

Center bore59.6 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 90S	14x5.5 ET42 ~~5x114.3~~	1.8	Tires Rims
195/70 R14 89H	14x6 ET42 ~~5x114.3~~	1.8	Tires Rims
205/60 R15 89H	15x6 ET42 ~~5x114.3~~	1.8	Tires Rims

145 hp · I4 195/60 R15 88V 2 fitments

GenerationI 1989–1992

Power145 hp

EngineI4, Petrol

Center bore59.6 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15 88V	15x6 ET42 ~~5x114.3~~	1.8	Tires Rims
205/60 R15 91V	15x6 ET42 ~~5x114.3~~	1.8	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.