Skip to content

2021 Ford S-MAX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Ford S-MAX.

2021 Ford S-MAX tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Ford S-MAX II Facelift

2020 – 2023 Europe market 3 trims

S-MAX 2.0 EcoBlue

148 hp · 2.0L I4 235/55 R17 103W 5 fitments
GenerationII Facelift 2020–2023
Power148 hp
Engine2.0L I4, Diesel
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 103W17x7.5 ET55 5x1082.4TiresRims
235/50 R18 101W18x7.5 ET55 5x1082.2TiresRims
245/45 R19 102W19x8 ET55 5x1082.4TiresRims
235/55 R17 103V17x7.5 ET55 5x1082.2TiresRims
235/50 ZR18 101Y18x7.5 ET55 5x1082.4TiresRims

S-MAX 2.0 EcoBlue

188 hp · 2.0L I4 235/55 R17 103W 5 fitments
GenerationII Facelift 2020–2023
Power188 hp
Engine2.0L I4, Diesel
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 103W17x7.5 ET55 5x1082.2TiresRims
235/50 R18 101W18x7.5 ET55 5x1082.2TiresRims
245/45 R19 102W19x8 ET55 5x1082.4TiresRims
235/55 R17 103V17x7.5 ET55 5x1082.2TiresRims
235/50 ZR18 101Y18x7.5 ET55 5x1082.4TiresRims

S-MAX 2.5 Duratec FHEV

188 hp · 2.5L I4 235/55 R17 103W 5 fitments
GenerationII Facelift 2020–2023
Power188 hp
Engine2.5L I4, Hybrid
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R17 103W17x7.5 ET55 5x1082.4TiresRims
235/50 R18 101W18x7.5 ET55 5x1082.2TiresRims
245/45 R19 102W19x8 ET55 5x1082.4TiresRims
235/55 R17 103V17x7.5 ET55 5x1082.2TiresRims
235/50 ZR18 101Y18x7.5 ET55 5x1082.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.