Skip to content

2011 Ford Territory tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Ford Territory.

2011 Ford Territory tire sizes

Bolt pattern

2 generations were sold in 2011. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Ford Territory SZ.I

2011 – 2014 Australia market 2 trims

Territory 2.7TDCi

188 hp · V6 235/60 R17 102H 2 fitments
GenerationSZ.I 2011–2014
Power188 hp
EngineV6, Diesel
Center bore70.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R17 102H17x7.5 ET36.5 5x114.334TiresRims
235/55 R18 104V18x7.5 ET36.5 5x114.330TiresRims

Territory 4.0 DI-VTC

261 hp · I6 235/60 R17 102H 2 fitments
GenerationSZ.I 2011–2014
Power261 hp
EngineI6, Petrol
Center bore70.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R17 102H17x7.5 ET36.5 5x114.334TiresRims
235/55 R18 104V18x7.5 ET36.5 5x114.330TiresRims

Ford Territory SY.II

2009 – 2011 Australia market 2 trims

Territory 4.0i

255 hp · I6 235/60 R17 102H 2 fitments
GenerationSY.II 2009–2011
Power255 hp
EngineI6, Petrol
Center bore70.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/60 R17 102H17x7.5 ET36.5 5x114.3TiresRims
235/55 R18 104V18x7.5 ET36.5 5x114.3TiresRims

Territory 4.0i Turbo

329 hp · I6 235/55 R18 104V 1 fitment
GenerationSY.II 2009–2011
Power329 hp
EngineI6, Petrol
Center bore70.6 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/55 R18 104V18x7.5 ET36.5 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.