Skip to content
tirewheelguide.com

1988 Ford Thunderbird tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Ford Thunderbird.

1988 Ford Thunderbird tire sizes

205/70RS14225/60RH15195/75RS14205/65RS15205/65RH15225/60RV15225/55RV16
Bolt pattern
Other years
19841985198619871988198919901991 All 1955–2005
Fitment tables

3 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear.

Ford Thunderbird IX

1983 – 1988 3 trims

Thunderbird 2.3T

156 hp · I4 195/75 SR14 4 fitments
GenerationIX 1983–1988
Power156 hp
EngineI4, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET28 4x10829TiresRims
205/70 SR1414x6 ET25 4x10829TiresRims
205/65 SR1515x6.5 ET25 4x10830TiresRims
225/60 HR1515x7 ET22 4x10830TiresRims

Thunderbird 3.8

134 hp · V6 195/75 SR14 4 fitments
GenerationIX 1983–1988
Power134 hp
EngineV6, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5.5 ET28 4x10829TiresRims
205/70 SR1414x6 ET25 4x10829TiresRims
205/65 SR1515x6 ET25 4x10830TiresRims
225/60 HR1515x7 ET22 4x10830TiresRims

Thunderbird 5.0

122 hp · V8 205/70 SR14 4 fitments
GenerationIX 1983–1988
Power122 hp
EngineV8, Petrol
Center bore63.4 mm
PCD4x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
205/70 SR1414x6 ET25 4x10829TiresRims
205/65 HR1515x6.5 ET25 4x10830TiresRims
225/60 VR1515x7 ET22 4x10830TiresRims
225/55 VR1616x7.5 ET20 4x10830TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading