Skip to content

2024 Ford Transit T8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Ford Transit T8.

2024 Ford Transit T8 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Ford Transit T8 Transit T8

2023 – 2027 2 trims

Transit T8 2.0 Duratorq

152 hp · 2.0 L I4 Diesel 2.0 L I4 195/75 R16 4 fitments
GenerationTransit T8 2023–2027
MarketChina
Power152 hp
Engine2.0 L I4 Diesel 2.0 L I4, Diesel
Center bore138.8 mm
PCD6x180
ThreadM14 x 2.0
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/75 R1616x5.5 ET109 6x180–TiresRims
Alt205/75 R1616x5.5 ET109 6x180–TiresRims
Alt195/75 R1616x6 ET109 6x180–TiresRims
Alt205/75 R1616x6 ET109 6x180–TiresRims

Transit T8 2.3 Duratorq

172 hp · 2.3 L I4 Diesel 2.3 L I4 195/75 R16 4 fitments
GenerationTransit T8 2023–2027
MarketChina
Power172 hp
Engine2.3 L I4 Diesel 2.3 L I4, Diesel
Center bore138.8 mm
PCD6x180
ThreadM14 x 2.0
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/75 R1616x5.5 ET109 6x180–TiresRims
Alt205/75 R1616x5.5 ET109 6x180–TiresRims
Alt195/75 R1616x6 ET109 6x180–TiresRims
Alt205/75 R1616x6 ET109 6x180–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.