2020 GAC Honda Accord tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 GAC Honda Accord.

2020 GAC Honda Accord tire sizes

225/50R17 235/45R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2019 – 2023 China market 3 trims

174 hp · L15B I4 225/50 R17 94V 2 fitments

GenerationX CV 2019–2023

Power174 hp

EngineL15B I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x7.5 ET45 ~~5x114.3~~	32	Tires Rims
235/45 ZR18 94W	18x8 ET50 ~~5x114.3~~	32	Tires Rims

192 hp · L15B I4 225/50 R17 94V 2 fitments

GenerationX CV 2019–2023

Power192 hp

EngineL15B I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x7.5 ET45 ~~5x114.3~~	32	Tires Rims
235/45 ZR18 94W	18x8 ET50 ~~5x114.3~~	32	Tires Rims

181 hp · I4 225/50 R17 94V 2 fitments

GenerationX CV 2019–2023

Power181 hp

EngineI4, Hybrid

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R17 94V	17x7.5 ET45 ~~5x114.3~~	32	Tires Rims
235/45 ZR18 94W	18x8 ET50 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.