2018 GAC Honda Crider tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 GAC Honda Crider.

2018 GAC Honda Crider tire sizes

215/55R16 205/55R16 205/50R17

Bolt pattern

5x114.3

2 generations were sold in 2018. Check your chassis code before ordering wheels.

Other years

2013 2014 2015 2016 2017 2018 2019 2020 All 2013–2020

Fitment tables

3 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

GAC Honda Crider II

2018 – 2023 China market 2 trims

Crider 1.0T

121 hp · P10A I3 215/55 R16 1 fitment

GenerationII 2018–2023

Power121 hp

EngineP10A I3, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 R16	16x7 ~~5x114.3~~	–	Tires Rims

Crider 1.5H

152 hp · LEB-MMD I4 215/55 R16 1 fitment

GenerationII 2018–2023

Power152 hp

EngineLEB-MMD I4, Hybrid

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 R16	16x7 7J ~~5x114.3~~	–	Tires Rims

GAC Honda Crider I

2013 – 2018 China market 1 trim

Crider 1.8i

137 hp · R18Z I4 205/55 R16 91V 2 fitments

GenerationI 2013–2018

Power137 hp

EngineR18Z I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R16 91V	16x6.5 ET48 ~~5x114.3~~	2.5	Tires Rims
205/50 R17 93V	17x7 ET48 ~~5x114.3~~	2.5	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.