2011 GAC Honda Crosstour tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 GAC Honda Crosstour.

2011 GAC Honda Crosstour tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2013 China market 2 trims

194 hp · K24A I4 225/65 R17 102T 3 fitments

GenerationTF 2011–2013

Power194 hp

EngineK24A I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102T	17x6.5 ET55 ~~5x114.3~~	32	Tires Rims
225/60 R18 100H	18x7 ET55 ~~5x114.3~~	33	Tires Rims
245/55 R18 103H	18x7.5 ET48 ~~5x114.3~~	33	Tires Rims

276 hp · J35Z V6 225/60 R18 100H 3 fitments

GenerationTF 2011–2013

Power276 hp

EngineJ35Z V6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R18 100H	18x7 ET55 ~~5x114.3~~	33	Tires Rims
225/55 R19 99H	19x7.5 ET55 ~~5x114.3~~	33	Tires Rims
245/50 R19 101V	19x8 ET48 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.