2007 GAC Honda Odyssey tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 GAC Honda Odyssey.

2007 GAC Honda Odyssey tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2008 China market 1 trim

168 hp · K24A I4 215/60 R16 95H 4 fitments

GenerationIII RB 2004–2008

Power168 hp

EngineK24A I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x6.5 ET55 ~~5x114.3~~	2	Tires Rims
215/55 R17 93V	17x7 ET55 ~~5x114.3~~	2.2	Tires Rims
225/45 ZR18 91W	18x7 ET55 ~~5x114.3~~	2.2	Tires Rims
225/45 ZR18 93W	18x7 ET55 ~~5x114.3~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.