2012 GAC Toyota Highlander tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 GAC Toyota Highlander.

2012 GAC Toyota Highlander tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2014 China market 3 trims

217 hp · 8AR-FTS I4 245/65 R17 105H 3 fitments

GenerationXU40 Facelift 2012–2014

Power217 hp

Engine8AR-FTS I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/65 R17 105H	17x7.5 ET35 ~~5x114.3~~	30	Tires Rims
245/60 R18 105H	18x7.5 ET35 ~~5x114.3~~	30	Tires Rims
245/55 R19 103V	19x7.5 ET35 ~~5x114.3~~	30	Tires Rims

185 hp · 1AR-FE I4 245/65 R17 105H 3 fitments

GenerationXU40 Facelift 2012–2014

Power185 hp

Engine1AR-FE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/65 R17 105H	17x7.5 ET35 ~~5x114.3~~	30	Tires Rims
245/60 R18 105H	18x7.5 ET35 ~~5x114.3~~	30	Tires Rims
245/55 R19 103H	19x7.5 ET35 ~~5x114.3~~	30	Tires Rims

270 hp · 2GR-FE I4 245/60 R18 105H 3 fitments

GenerationXU40 Facelift 2012–2014

Power270 hp

Engine2GR-FE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/60 R18 105H	18x7.5 ET35 ~~5x114.3~~	30	Tires Rims
245/55 R19 103V	19x7.5 ET35 ~~5x114.3~~	30	Tires Rims
265/50 R19 110V	19x8 ET35 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.