Skip to content

2024 GAC GN8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 GAC GN8.

2024 GAC GN8 tire sizes

Bolt pattern

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

GAC GN8 II

2024 – 2027 1 trim

GN8 2.0T (MPV, 5d)

248 hp · 2.0 L I4 Petrol 2.0 L I4 225/55 R18 2 fitments
GenerationII 2024–2027
MarketMexico
Power248 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore59.5 mm
PCD5x120
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x7.5 ET41 5x120TiresRims
Alt225/60 R1717x7 ET41 5x120TiresRims

GAC GN8 GN8

2020 – 2024 1 trim

GN8 2.0TC (MPV, 5d)

198 hp · 2.0 L I4 Petrol 2.0 L I4 235/60 R18 2 fitments
GenerationGN8 2020–2024
MarketLatin America
Power198 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore59.5 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 ET46 5x120TiresRims
OEFront245/55 R1919x 5x120TiresRims
Rear245/55 R19 5x120Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.