Skip to content

2022 GAC iA5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 GAC iA5.

2022 GAC iA5 tire sizes

Bolt pattern

2 generations were sold in 2022. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

GAC iA5 XV70 Facelift

2022 – 2023 1 trim

iA5 EV (Saloon)

201 hp · Electric 215/55 R17 2 fitments
GenerationXV70 Facelift 2022–2023
MarketChina
Power201 hp
EngineElectric, Electric
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1717x7.5 ET45 5x108–TiresRims
OE235/45 R1818x8 ET50 5x108–TiresRims

GAC iA5 XV70

2019 – 2022 1 trim

iA5 EV (Saloon)

181 hp · Electric 215/55 R17 2 fitments
GenerationXV70 2019–2022
MarketChina
Power181 hp
EngineElectric, Electric
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/55 R1717x7.5 ET45 5x108–TiresRims
OE235/45 R1818x8 ET50 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.