Skip to content

2027 GAC E8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2027 GAC E8.

2027 GAC E8 tire sizes

Fitment tables

1 trim sold in 2027

Open a trim for its factory package and every alternative size, front and rear.

GAC E8 II

2026 – 2027 1 trim

E8 1.5 T-GDI (MPV, 5d)

436 hp · 1.5 L 4A15J4 I4 Petrol 1.5 L 4A15J4 I4 225/55 R18 1 fitment
GenerationII 2026–2027
MarketChina
Power436 hp
Engine1.5 L 4A15J4 I4 Petrol 1.5 L 4A15J4 I4, Petrol
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/55 R1818x7 38TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.