Skip to content

2022 GAC GS8 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 GAC GS8.

Bolt pattern

2 generations were sold in 2022. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

GAC GS8 II

2021 – 2027 2 trims

GS8 2.0T GDI (SUV, 5d)

248 hp · 2.0 L 4B20 I4 Petrol 2.0 L 4B20 I4 255/55 R19 3 fitments
GenerationII 2021–2027
MarketMexico
Power248 hp
Engine2.0 L 4B20 I4 Petrol 2.0 L 4B20 I4, Petrol
Center bore59.5 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE255/55 R1919x7.5 ET41 5x120–TiresRims
OE255/50 R2020x8.5 ET45 5x120–TiresRims
Alt265/50 R2020x8.5 ET45 5x120–TiresRims

GS8 2.0TM (SUV, 5d)

228 hp · 2.0 L I4 Petrol 2.0 L I4 255/55 R19 / 255/55 R19 3 fitments
GenerationII 2021–2027
Power228 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore59.5 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/55 R1919x 5x120–TiresRims
Rear255/55 R19 5x120–Tires
OE255/50 R2020x8.5 ET45 5x120–TiresRims
Alt265/50 R2020x8.5 ET45 5x120–TiresRims

GAC GS8 I

2016 – 2022 1 trim

GS8 2.0T (SUV, 5d)

188 hp · 2.0 L 4B20M1 I4 Petrol 2.0 L 4B20M1 I4 235/60 R18 3 fitments
GenerationI 2016–2022
Power188 hp
Engine2.0 L 4B20M1 I4 Petrol 2.0 L 4B20M1 I4, Petrol
Center bore59.5 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/60 R1818x7 ET41 5x120–TiresRims
OE245/55 R1919x7.5 ET41 5x120–TiresRims
Alt255/45 R2020x8 ET45 5x120–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.