2024 Geely Binyue tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Geely Binyue.

2024 Geely Binyue tire sizes

215/65R16 215/60R17

Bolt pattern

5x114.3

2 generations were sold in 2024. Check your chassis code before ordering wheels.

Other years

2018 2019 2020 2021 2022 2023 2024 2025 All 2018–2025

Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Geely Binyue BMA Facelift

2024 – 2027 2 trims

Binyue 1.5i

125 hp · 1.5 L Petrol 1.5 L x 2 fitments

GenerationBMA Facelift 2024–2027

MarketChina

Power125 hp

Engine1.5 L Petrol 1.5 L, Petrol

Center bore54.1 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	x	~~5x114.3~~	32	Tires
Alt	x	~~5x114.3~~	32	Tires

Binyue 1.5T

178 hp · 1.5 L Petrol 1.5 L 215/65 R16 2 fitments

GenerationBMA Facelift 2024–2027

MarketChina

Power178 hp

Engine1.5 L Petrol 1.5 L, Petrol

Center bore54.1 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	215/65 R16	16x6.5 ET45 ~~5x114.3~~	32	Tires Rims
Alt	215/60 R17	17x6.5 ET45 ~~5x114.3~~	32	Tires Rims

Geely Binyue BMA

2018 – 2024 1 trim

Binyue 1.4TD

139 hp · 1.4 L Petrol 1.4 L 215/65 R16 2 fitments

GenerationBMA 2018–2024

MarketChina

Power139 hp

Engine1.4 L Petrol 1.4 L, Petrol

Center bore54.1 mm

PCD5x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	215/65 R16	16x6.5 ET45 ~~5x114.3~~	32	Tires Rims
Alt	215/60 R17	17x6.5 ET45 ~~5x114.3~~	32	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.