Skip to content

2014 Geely CK tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Geely CK.

2014 Geely CK tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Geely CK CK

2005 – 2016 5 trims

CK 1.0i

67 hp · I3 175/65 R14 1 fitment
GenerationCK 2005–2016
MarketLatin America
Power67 hp
EngineI3, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET45 4x100TiresRims

CK 1.3 GS

85 hp · I4 175/60 R14 1 fitment
GenerationCK 2005–2016
MarketLatin America
Power85 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5.5 ET45 4x100TiresRims

CK 1.3i

84 hp · 1.3L I4 175/65 R14 82T 1 fitment
GenerationCK 2005–2016
MarketEurope
Power84 hp
Engine1.3L I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET40 4x10029TiresRims

CK 1.5 GS

93 hp · I4 175/60 R14 1 fitment
GenerationCK 2005–2016
MarketLatin America
Power93 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/60 R1414x5.5 ET45 4x100TiresRims

CK 1.5i

93 hp · 1.5L I4 175/65 R14 82T 1 fitment
GenerationCK 2005–2016
MarketEurope
Power93 hp
Engine1.5L I4, Petrol
Center bore60.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET40 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.