Skip to content

2008 Geely MK tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Geely MK.

2008 Geely MK tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Geely MK I

2006 – 2015 3 trims

MK 1.5i

93 hp · 1.5L 5A-FE I4 185/60 R15 84H 3 fitments
GenerationI 2006–2015
MarketEurope
Power93 hp
Engine1.5L 5A-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 84H15x6 ET43 4x1002.1TiresRims
175/65 R14 79S14x5.5 ET45 4x10029TiresRims
195/55 R15 85T15x6 ET43 4x10029TiresRims

MK 1.5i

91 hp · I4 185/60 R15 1 fitment
GenerationI 2006–2015
MarketLatin America
Power91 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1515x6 ET39 4x100TiresRims

MK 1.5i

93 hp · I4 185/60 R15 1 fitment
GenerationI 2006–2015
MarketChina
Power93 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1515x6 ET39 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.