Skip to content

2017 Genesis G70 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Genesis G70.

2017 Genesis G70 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear.

Genesis G70 IK

2017 – 2021 4 trims

G70 2.0 T-GDi AT

248 hp · 2.0L G4KL I4 225/40 ZR19 93Y / 255/35 ZR19 96Y 2 fitments
GenerationIK 2017–2021
Power248 hp
Engine2.0L G4KL I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR19 93Y19x8 ET34 5x114.336TiresRims
Rear255/35 ZR19 96Y19x8.5 ET46.5 5x114.336TiresRims
225/45 ZR18 95Y18x8 ET34 5x114.336TiresRims

G70 2.0 T-GDi MT

251 hp · 2.0L G4KL I4 225/40 ZR19 93Y / 255/35 ZR19 96Y 2 fitments
GenerationIK 2017–2021
Power251 hp
Engine2.0L G4KL I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR19 93Y19x8 ET34 5x114.336TiresRims
Rear255/35 ZR19 96Y19x8.5 ET46.5 5x114.336TiresRims
225/45 ZR18 95Y18x8 ET34 5x114.336TiresRims

G70 2.2 e-VGT

199 hp · 2.2L D4HC I4 225/50 R17 98V 3 fitments
GenerationIK 2017–2021
Power199 hp
Engine2.2L D4HC I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R17 98V17x7 ET38 5x114.336TiresRims
225/45 ZR18 95Y18x8 ET34 5x114.336TiresRims
225/40 ZR19 93Y19x8.5 ET46.5 5x114.336TiresRims

G70 3.3 T-GDi

365 hp · 3.3L G6DP V6 225/45 ZR18 95Y 2 fitments
GenerationIK 2017–2021
Power365 hp
Engine3.3L G6DP V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/45 ZR18 95Y18x8 ET34 5x114.336TiresRims
225/40 ZR19 93Y19x8.5 ET46.5 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.