Skip to content

2024 Genesis G90 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Genesis G90.

2024 Genesis G90 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Genesis G90 II (RS4)

2022 – 2027 2 trims

G90 3.5 T-GDi (Saloon)

375 hp · 3.5 L Petrol 3.5 L 245/50 R19 3 fitments
GenerationII (RS4) 2022–2027
MarketUSA
Power375 hp
Engine3.5 L Petrol 3.5 L, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/50 R1919x8.5 ET31 5x114.3–TiresRims
OEFront245/45 R2020x8.5 ET31 5x114.3–TiresRims
Rear275/40 R2020x9.5 ET45 5x114.3–TiresRims
AltFront245/40 ZR2121x8.5 ET31 5x114.338TiresRims
Rear275/35 ZR2121x9.5 ET45 5x114.339TiresRims

G90 3.5 T-GDi e-SC (Saloon)

409 hp · 3.5 L Hybrid 3.5 L 245/45 R20 / 275/40 R20 3 fitments
GenerationII (RS4) 2022–2027
MarketUSA
Power409 hp
Engine3.5 L Hybrid 3.5 L, Hybrid
Center bore67.1 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront245/45 R2020x8.5 ET31 5x114.3–TiresRims
Rear275/40 R2020x9.5 ET45 5x114.3–TiresRims
Alt245/50 R1919x8.5 ET31 5x114.3–TiresRims
AltFront245/40 ZR2121x8.5 ET31 5x114.338TiresRims
Rear275/35 ZR2121x9.5 ET45 5x114.339TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.