Skip to content
tirewheelguide.com

1992 GEO Metro tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 GEO Metro.

1992 GEO Metro tire sizes

155/70R13165/65R13155/80R12165/60R14145/80R12175/60R14
Bolt pattern
Other years
19891990199119921993199419951996 All 1989–2001
Fitment tables

3 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

GEO Metro GM M

1989 – 1994 USA market 3 trims

Metro 1.0

48 hp · I3 145/80 R12 75S 4 fitments
GenerationGM M 1989–1994
Power48 hp
EngineI3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM10 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
145/80 R12 75S12x4 ET45 4x114.326TiresRims
155/80 R12 75S12x4.5 ET45 4x114.326TiresRims
155/70 R13 75S13x4.5 ET45 4x114.326TiresRims
165/65 R13 75S13x4.5 ET45 4x114.329TiresRims

Metro 1.0 Convertible

48 hp · I3 155/80 R12 75S 4 fitments
GenerationGM M 1989–1994
Power48 hp
EngineI3, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R12 75S12x4.5 ET45 4x114.326TiresRims
155/70 R13 75S13x4.5 ET45 4x114.326TiresRims
165/65 R13 75S13x4.5 ET45 4x114.329TiresRims
165/60 R14 75S14x5 ET45 4x114.329TiresRims

Metro 1.3 Convertible

67 hp · I4 155/70 R13 75S 4 fitments
GenerationGM M 1989–1994
Power67 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 75S13x4.5 ET45 4x114.326TiresRims
165/65 R13 75S13x4.5 ET45 4x114.329TiresRims
165/60 R14 75S14x4.5 ET45 4x114.329TiresRims
175/60 R14 79H14x5 ET45 4x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading