2000 GEO Prizm tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 GEO Prizm.

2000 GEO Prizm tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2002 USA market 1 trim

119 hp · I4 155x SR13 8 fitments

GenerationE110 1998–2002

Power119 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x5 ET39 ~~4x100~~	28	Tires Rims
175/70 SR13	13x5 ET41 ~~4x100~~	29	Tires Rims
165/70 SR14	14x5 ET41 ~~4x100~~	29	Tires Rims
185/65 R14	14x5.5 ET42 ~~4x100~~	30	Tires Rims
185/55 HR15	15x6 ET45 ~~4x100~~	30	Tires Rims
195/50 HR15	15x6 ET42 ~~4x100~~	30	Tires Rims
205/50 HR15	15x6.5 ET42 ~~4x100~~	30	Tires Rims
215/40 VR16	16x7 ET38 ~~4x100~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.