1989 GEO Tracker tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 GEO Tracker.

1989 GEO Tracker tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1998 USA market 1 trim

80 hp · I4 195x R15 87S 7 fitments

GenerationI 1989–1998

Power80 hp

EngineI4, Petrol

Center bore108 mm

PCD5x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R15 87S	15x5.5 ET15 ~~5x139.7~~	23	Tires Rims
205/75 R15 87S	15x5.5 ET15 ~~5x139.7~~	23	Tires Rims
225/70 R15 89S	15x6.5 ET5 ~~5x139.7~~	23	Tires Rims
205/70 R16 85S	16x6 ET10 ~~5x139.7~~	23	Tires Rims
225/65 R16 87T	16x6.5 ET5 ~~5x139.7~~	26	Tires Rims
215/60 R17 85T	17x6 ET10 ~~5x139.7~~	26	Tires Rims
235/55 R17 85H	17x7 ET0 ~~5x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.