1985 GMC Jimmy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 GMC Jimmy.

1985 GMC Jimmy tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1991 USA market 3 trims

79 hp · I4 205/75 SR15 2 fitments

GenerationS-15 1982–1991

Power79 hp

EngineI4, Diesel

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR15	15x6 ET63 ~~5x120.65~~	29	Tires Rims
235/70 SR15	15x7 ET51 ~~5x120.65~~	32	Tires Rims

110 hp · V6 205/75 SR15 2 fitments

GenerationS-15 1982–1991

Power110 hp

EngineV6, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 SR15	15x6 ET63 ~~5x120.65~~	29	Tires Rims
235/70 SR15	15x7 ET51 ~~5x120.65~~	32	Tires Rims

N/A · I4 195/75 R14 103S 2 fitments

GenerationS-15 1982–1991

PowerN/A

EngineI4, Petrol

Center bore70.3 mm

PCD5x120.65

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/75 R14 103S	14x5.5 ET28 ~~5x120.65~~	–	Tires Rims
205/75 R14 105S	14x6 ET25 ~~5x120.65~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.