Skip to content

2010 GMC Savana 2500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 GMC Savana 2500.

2010 GMC Savana 2500 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2010

Open a trim for its factory package and every alternative size, front and rear.

GMC Savana 2500 GMT610

2003 – 2027 USA market 3 trims

Savana 2500 4.8i

280 hp · V8 225/75 R16 3 fitments
GenerationGMT610 2003–2027
Power280 hp
EngineV8, Petrol
Center bore116.7 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R1616x6.5 ET33 8x165.15.2TiresRims
245/75 R1616x6.5 ET29 8x165.15.2TiresRims
245/70 R1717x7 ET30 8x165.15.2TiresRims

Savana 2500 6.0i

323 hp · V8 225/75 R16 3 fitments
GenerationGMT610 2003–2027
Power323 hp
EngineV8, Petrol
Center bore116.7 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R1616x6.5 ET33 8x165.15.2TiresRims
245/75 R1616x6.5 ET29 8x165.15.2TiresRims
245/70 R1717x7 ET30 8x165.15.2TiresRims

Savana 2500 6.6 TD

260 hp · V8 245/75 R16 2 fitments
GenerationGMT610 2003–2027
Power260 hp
EngineV8, Diesel
Center bore116.7 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R1616x6.5 ET29 8x165.15.5TiresRims
255/70 R1717x7 ET30 8x165.15.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.