Skip to content

1996 GMC Sierra 1500 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 GMC Sierra 1500.

Fitment tables

2 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

GMC Sierra 1500 GMT400

1988 – 1998 USA market 2 trims

Sierra 1500 2WD

N/A · V6 225/75 R15 111S 6 fitments
GenerationGMT400 1988–1998
PowerN/A
EngineV6, Petrol
Center bore78.3 mm
PCD5x127
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R15 111S15x6.5 ET43 5x1272.2TiresRims
235/75 R15 111S15x7 ET38 5x1272.4TiresRims
235/70 R16 111S16x7 ET38 5x1272.4TiresRims
255/65 R16 110T16x7.5 ET35 5x1272.3TiresRims
255/60 R17 110T17x7.5 ET35 5x1272.3TiresRims
255/55 R18 108H18x8 ET30 5x1272.2TiresRims

Sierra 1500 4WD

N/A · V6 255/70 R16 111S 5 fitments
GenerationGMT400 1988–1998
PowerN/A
EngineV6, Petrol
Center bore78.3 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
255/70 R16 111S16x7 ET31 6x139.72.2TiresRims
255/65 R17 110T17x7.5 ET25 6x139.72.2TiresRims
255/60 R18 110T18x7.5 ET25 6x139.72.2TiresRims
275/55 R18 108H18x8.5 ET25 6x139.72.3TiresRims
285/45 R20 106V20x9 ET20 6x139.72.4TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.