Skip to content

2008 GMC Sierra 2500HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 GMC Sierra 2500HD.

Bolt pattern
Fitment tables

2 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

GMC Sierra 2500HD GMT900

2007 – 2013 USA market 2 trims

Sierra 2500HD 6.0i

353 hp · V8 245/75 R16 120S 7 fitments
GenerationGMT900 2007–2013
Power353 hp
EngineV8, Petrol
Center bore116.7 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R16 120S16x6.5 ET28 8x165.15.2TiresRims
245/75 R1717x7 ET28 8x165.15.2TiresRims
265/70 R1717x7.5 ET28 8x165.15.2TiresRims
265/65 R1818x8 ET24 8x165.15.2TiresRims
265/60 R2020x8 ET24 8x165.15.2TiresRims
275/55 R2020x8.5 ET20 8x165.15.2TiresRims
285/50 R2020x9 ET20 8x165.15.2TiresRims

Sierra 2500HD 6.6TD

365 hp · V8 245/75 R16 120S 7 fitments
GenerationGMT900 2007–2013
Power365 hp
EngineV8, Diesel
Center bore116.7 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
245/75 R16 120S16x6.5 ET28 8x165.15.2TiresRims
245/75 R1717x7 ET28 8x165.15.2TiresRims
265/70 R1717x7.5 ET28 8x165.15.2TiresRims
265/65 R1818x8 ET24 8x165.15.2TiresRims
265/60 R2020x8 ET24 8x165.15.2TiresRims
275/55 R2020x8.5 ET20 8x165.15.2TiresRims
285/50 R2020x9 ET20 8x165.15.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.