Skip to content

2009 GMC Terrain tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 GMC Terrain.

Fitment tables

2 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

GMC Terrain Terrain

2008 – 2010 2 trims

Terrain 2.4i

141 hp · 2.4L I4 215/70 R16 100T 7 fitments
GenerationTerrain 2008–2010
Power141 hp
Engine2.4L I4, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 100T16x6.5 ET46 5x11530TiresRims
235/65 R17 104H17x7 ET46 5x11530TiresRims
235/60 R17 102H17x7 ET46 5x11530TiresRims
235/55 R18 100H18x7 ET45 5x11530TiresRims
245/50 R18 100H18x7.5 ET45 5x11533TiresRims
235/50 R19 99H19x7 ET45 5x11535TiresRims
245/45 ZR19 98Y19x8 ET45 5x11535TiresRims

Terrain 3.2i

223 hp · 3.2L V6 215/70 R16 100T 7 fitments
GenerationTerrain 2008–2010
Power223 hp
Engine3.2L V6, Petrol
Center bore70.2 mm
PCD5x115
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 100T16x6.5 ET46 5x11530TiresRims
235/65 R17 104H17x7 ET46 5x11530TiresRims
235/60 R17 102H17x7 ET46 5x11530TiresRims
235/55 R18 100H18x7 ET45 5x11530TiresRims
245/50 R18 100H18x7.5 ET45 5x11533TiresRims
235/50 R19 99H19x7 ET45 5x11535TiresRims
245/45 ZR19 98Y19x8 ET45 5x11535TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.