Skip to content

2011 GMC Yukon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 GMC Yukon.

2011 GMC Yukon tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

GMC Yukon GMT900

2007 – 2014 USA market 3 trims

Yukon 5.3i

321 hp · 5.3L V8 265/70 R17 3 fitments
GenerationGMT900 2007–2014
Power321 hp
Engine5.3L V8, Petrol
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/70 R1717x7.5 ET31 6x139.7–TiresRims
265/65 R1818x8 ET31 6x139.7–TiresRims
275/55 R2020x8.5 ET31 6x139.7–TiresRims

Yukon 6.0i

333 hp · V8 265/65 R18 3 fitments
GenerationGMT900 2007–2014
Power333 hp
EngineV8, Hybrid
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R1818x8 ET31 6x139.7–TiresRims
275/55 R2020x8.5 ET31 6x139.7–TiresRims
285/45 R2222x9 ET25 6x139.7–TiresRims

Yukon 6.2i

405 hp · 6.2L V8 Flex-Fuel 265/65 R18 3 fitments
GenerationGMT900 2007–2014
Power405 hp
Engine6.2L V8 Flex-Fuel
Center bore78.1 mm
PCD6x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
265/65 R1818x8 ET31 6x139.7–TiresRims
275/55 R2020x8.5 ET31 6x139.7–TiresRims
285/45 R2222x9 ET25 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.