2024 Great Wall Cannon Alpha tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Great Wall Cannon Alpha.

2024 Great Wall Cannon Alpha tire sizes

Bolt pattern

Other years

2024 2025 All 2024–2025

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2024 – 2027 2 trims

342 hp · 2.0 L GW4C20 I4 Hybrid 2.0 L GW4C20 I4 265/60 R18 3 fitments

GenerationGreat Wall (GWM) Cannon Alpha 2024–2027

MarketAustralia

Power342 hp

Engine2.0 L GW4C20 I4 Hybrid 2.0 L GW4C20 I4, Hybrid

Center bore100.1 mm

PCD6x139.7

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	265/60 R18	18x8 ET42 ~~6x139.7~~	–	Tires Rims
Alt	265/65 R18	18x7.5 ET42 ~~6x139.7~~	–	Tires Rims
Alt	265/55 R19	19x8 ET42 ~~6x139.7~~	–	Tires Rims

181 hp · 2.4 L GW4D24 I4 Diesel 2.4 L GW4D24 I4 265/60 R18 3 fitments

GenerationGreat Wall (GWM) Cannon Alpha 2024–2027

MarketAustralia

Power181 hp

Engine2.4 L GW4D24 I4 Diesel 2.4 L GW4D24 I4, Diesel

Center bore100.1 mm

PCD6x139.7

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	265/60 R18	18x8 ET42 ~~6x139.7~~	–	Tires Rims
Alt	265/65 R18	18x7.5 ET42 ~~6x139.7~~	–	Tires Rims
Alt	265/55 R19	19x8 ET42 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.