Skip to content

2006 Great Wall Deer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Great Wall Deer.

2006 Great Wall Deer tire sizes

Bolt patterns
Fitment tables

2 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Great Wall Deer Deer

1996 – 2013 2 trims

Deer 2.2i

103 hp · 2.2L 491QE I2 215/75 R15 2 fitments
GenerationDeer 1996–2013
Power103 hp
Engine2.2L 491QE I2, Petrol
Center bore106.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 R1515x6 ET10 5x114.3–TiresRims
235/70 R1616x7 ET10 5x114.3–TiresRims

Deer 2.2i 4x4

103 hp · 2.2L 491QE I4 215/75 R15 2 fitments
GenerationDeer 1996–2013
Power103 hp
Engine2.2L 491QE I4, Petrol
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 R1515x6 ET10 6x139.7–TiresRims
235/70 R1616x7 ET10 6x139.7–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.